This blog covers the day to day progress of water rocket development by the Air Command Water Rockets team. It is also a facility for people to provide feedback and ask questions.

Friday, April 06, 2007

Thrust Measurement Rig - First Trials

We finished building the water rocket thrust measuring rig today, and did four firings to test it out. The first two tests did not use any dampening on the lever arm and as a result it was virtually impossible to see the scale needle as it flew around so much.

No Dampner in this photo

We then put a disk in a bucket of water on a long lightweight dowel mounted near the scale to act as dampner. This was suggested by Clifford Heath a while back and a similar technique was used by Antigravity Reaseach when they did their thrust measurement. The needle motion was much more steady. Thanks also to Jim Fackert for suggesting the camera pointed at the scale to take readings. We should also thank Gordon M, Richard W, David L, Trevor, Brian and others for useful suggestions on how to set up the thrust measurement rig.

Dampner Added to lever arm

We have plotted the initial thrust curves of an 8L rocket with a 7mm nozzle using only water and then again using foam and the difference in curve shape was quite substantial. We will not publish these initial results just yet, as we would like to confirm the data by repeating the experiment a number of times and then averaging the results. Full data will be published once we obtain it. Hopefully in the next few days.

_______________________________________________________________

1 comment:

Anonymous said...

Nice work george! I would like to see the difference in the foam and water . I beter the difference is very noticable in the air pules phase.

-Team Parental Advisory